Is Rockspace a good Wi-Fi extender? How do I reset my Rockspace Wi-Fi extender?

 Is Rockspace a good WiFi extender?

Network issues are common for everyone, wherever you go far from your router your network speed goes slow and you will face interruption in browsing social media or other sites. But as technology gets advanced right now, all router firms start to sell extenders. But We are not aware of which one is best for us.


Let’s go through the features of Rockspace Wi-fi Extender and get decide either its good for use or not:


Rockspace Extender has inbuilt dual-band extenders, It is able to work on both bands: 2.4 GHz or 5 GHz respectively. It serves 300 Mbps for 2.4Ghz and 1734 Mbps for 5 GHz with coverage capacity up to 1292 sq. ft.



Some Unique features are:


  • Easily Setup

  • 4 PCB dual-band antenna fully flexible and adjustable

  • Contain Wired gigabit port which supports 2100 Mbps speed

  • Supports IPv6 and IPV4 protocols

  • Smart Signal Switching capacity with optimal performance


Installation of Rockspace Wi-Fi Extender

  • There is no need to install network equipment. You just need a rockspace router, Laptop/mobile device, and power socket.

  • No need to download or install any software or application from any site or link. It’s too easy to set up the Rockspace extender.

  • Now Connect your laptop or mobile device with a Wi-fi network to whom you want to extend.

  • You should do all the process in the same room where the router is in.

  • Now, Plug in the extender to the outlet in the same room

  • You move your extender closer to your router to finish the dead zonal network issues

  • Click of Wi-fi icon and Scan the network available in the device and select the rockspace_EXT network name.

  • Now, you don’t have internet so open your browser and enter the link: http //re.rockspace.local or rerockspace.local or the IP address 192.168.0.254 in the address bar.

  • That link will redirect you to set up the page, where you can create a password for your rockspace extender management interface

  • Now, select the network you want to extend, use that password to connect your router with the extender.

  • Else you can connect the ethernet cable to your router and use the WPS button to complete the setup.


Boost your Wi-FI Performance


If you want to get the best performance from your extender then place that closer to the router, because if you keep your extender too far from the router then the connectivity gets lost and you will again face the same issue.

So, place your rockspace extender nearest to the router and closer to the dead zonal network area.


As per my recommendation, you can go with the rockspace extender; it's too easy to install, having dual band width, and is flexible to use.


How do I reset my Rockspace Wi-Fi extender?


Follow these steps to reset rockspace Wi-fi extender:


  • Find the reset button on the rockspace router and press it with your paperclip for a couple of seconds.

  • The LED light will turn red which shows that the reboot process got started

  • Wait till  30 seconds to access the extender, Use  re.rockspace.local , re.rockspace.local or htpp://192.168.50.

  • Login to there. rockspace.local login page through their default credentials, now on the main page of the admin panel.

  • Find the management Tab on the top right corner of the screen.

  • Click on that in the drop-down menu select Restore Factory Default Setting, 

  • A warning pop-up will display on your screen select ok on that.


With the help of these all steps you can reset your rockspace extender and get access to that again if still face any issue then visit: re.rockspace.local


Comments

Post a Comment

Popular posts from this blog

How do I connect my Rockspace repeater? How do I reset my repeater?

Image
  First of all, before getting to know about How do I connect my Rockspace repeater? We need to get aware of Rockspace repeater and about their features: Rockspace repeater is well known as a Wi-fi booster or Wi-fi Extender used for extending the existing network with a full-speed network. If you want to know more about their features then visit: re.rockspace.local or http:// re.rockspace.local. Method for setup the Rockspace repeater: There are two best methods recommended by the expert for getting connected with Wi-fi Extender. Those two methods are briefly explained here in the step-by-step process: Method 1#: Getting Connect by WPS Method: If you are using an old wi-fi extender then you need to reset the extender. For that, you have to press the reset button for a couple of minutes and the extender will reset. If your extender is new then no need to reset. Place the extender near the rockspace router. Plugin your rockspace wi-fi extender in the power socket and make sure that ...
Read more

How do I reset my rockspace Wi-Fi extender??

Image
  Rerockspace.local Wi-Fi Extender comes up with various models and speeds from the single band to dual bandwidth with high speed. The main task of a Rerockspace.local wi-fi extender is to extend your existing wi-fi network and increase the range area host where the network can’t reach. Your existing Wi-Fi should have the facility of dual-band to connect the Rerockspace.local Wi-Fi extender in the 5Ghz band that supplies your booster network with full speed and range. Let’s have a look how to connect this rerockspace-local Wi-Fi extenders with rockspace router: There is two way to set up a new rerockspace-local Wi-Fi repeater device, using the WPS button -doesn’t require login credentials and the second one - login rock space web interface with re.rockspace-local.com or default login IP address. In both methods, you should be physically available there beside the local Rockspace signal booster to connect with your existing host Wi-Fi network.  Setup the rerockspace-loca...
Read more

Why should I reset my re.rockspace.local range extender?

Image
  Like with any other hardware unit, your re.rockspace.local wireless extender too can face some problems or errors. There could be all sorts of potential reasons that you require to perform a reset on your range extender. Here, first of all, we will discuss all such potential reasons causing a kernel panic. Three of them are the basic reasons; 1. Bugs in firmware: - Just like a computer, your router and the wireless range extender can crash because of firmware bugs eating up most of the memory and causing compulsory reset to be performed. You can delete the bugs and clear the caches out of the memory of your range extender but some bugs can only be removed after reset.  2. IP addresses Conflicts: - Your Rockspace local wireless range extender manages both public and private IP addresses. Sometimes both the IP addresses mess up and create conflicts. If two or more devices on your network have the same IP address, or if your Rockspace range extender doesn't have an up-to-dat...
Read more