How do I connect my Rockspace repeater? How do I reset my repeater?

 First of all, before getting to know about How do I connect my Rockspace repeater? We need to get aware of Rockspace repeater and about their features:


Rockspace repeater is well known as a Wi-fi booster or Wi-fi Extender used for extending the existing network with a full-speed network. If you want to know more about their features then visit: re.rockspace.local or http:// re.rockspace.local.





Method for setup the Rockspace repeater:

There are two best methods recommended by the expert for getting connected with Wi-fi Extender. Those two methods are briefly explained here in the step-by-step process:


Method 1#: Getting Connect by WPS Method:


  • If you are using an old wi-fi extender then you need to reset the extender. For that, you have to press the reset button for a couple of minutes and the extender will reset. If your extender is new then no need to reset.

  • Place the extender near the rockspace router.

  • Plugin your rockspace wi-fi extender in the power socket and make sure that your extender is well connected and getting a proper power supply.

  • Now, wait for some seconds and then press the WPS button.

  • Don’t unplug the extender until the LED light of the extender turns from red to green solid light.

  • After that, unplug your extender and place it in the new location. But get ensured that you have to place your extender halfway from your router signal and the dead zone spot area.

  • Now, try to connect the laptop or any mobile device with an extended network to test the live internet connectivity.


Method 2# Getting Connect by Ethernet Cable


  • Try to place your extender near your router.

  • Use an ethernet cable to connect the Rockspace router with rockspace extender

  • Now, Plug in your router and extender in the power socket and make sure that both of them getting the proper power supply or not.

  • Turn on your system and open the default web browser in your system and enter the link re.rockspace.local or http:// re.rockspace.local and press enter.

  • re.rockspace.local login page start browsing and login page display on your screen if you get failed to execute that link then enter the default IP address and press enter.

  • Now, you will get land to rockspace local admin login page.

  • Enter the default login credentials of re.rockspace.local: username and password.

  • Press Log in or Sign In.

  • You will redirect to the admin panel setup page.

  • Choose the ‘extender’ tab to proceed with the process.

  • Now, follow all screen instruction, and after the completion of these all press the Save button to apply the final changes.

  • Now, Unplug your wi-fi extender and place it halfway from the router signal and dead zone spot to avoid the connection issues.

  • Now, try to connect the Wireless device like computer/laptop / mobile device to your wi-fi extender to check the network connectivity.


How do I reset my repeater?

Follow these steps to reset your repeater:


Reset your extender using the reset button:


  • Plugin your wi-fi extender in the power socket and verify that proper connection get supply or not.

  • Find the factory reset button or extender’s reset button in your wi-fi extender.

  • Most of the time the reset button located at the backside, bottom, or side panel of the extender.

  • Press the extender’s reset button or factory reset button for a couple of seconds.

  • Now, release that reset button your extender get reset.


Reset the extender using the web interface:


  • Log in to your extender.

  • Open the default web browser of the computer which one is connected with your extender.

  • If the router and extender both contain the variant username(SSID) and password the enter the link: re.rockspace.local or http:// re.rockspace.local.

  • If the router and extender contain the same username (SSID) and password then enter the default IP address with http:// or https://

  • Now press enter then re.rockspace.local login page will display 

  • Enter the default username and password

  • Press login

  • The rockspace local admin panel display

  • Now, select setting> other> reset

  • The confirmation page will display

  • Press confirm button to get agree

  • Your extender gets reset successfully

Conclusion: In this article, we get acknowledge about How do I connect my Rockspace repeater? How do I reset my repeater? Invariant way. If you want to explore more in these categories or face any query then visit: re.rockspace.local

Comments

Post a Comment

Popular posts from this blog

How do I reset my rockspace Wi-Fi extender??

Image
  Rerockspace.local Wi-Fi Extender comes up with various models and speeds from the single band to dual bandwidth with high speed. The main task of a Rerockspace.local wi-fi extender is to extend your existing wi-fi network and increase the range area host where the network can’t reach. Your existing Wi-Fi should have the facility of dual-band to connect the Rerockspace.local Wi-Fi extender in the 5Ghz band that supplies your booster network with full speed and range. Let’s have a look how to connect this rerockspace-local Wi-Fi extenders with rockspace router: There is two way to set up a new rerockspace-local Wi-Fi repeater device, using the WPS button -doesn’t require login credentials and the second one - login rock space web interface with re.rockspace-local.com or default login IP address. In both methods, you should be physically available there beside the local Rockspace signal booster to connect with your existing host Wi-Fi network.  Setup the rerockspace-local Wi-Fi E
Read more

Is Rockspace a good Wi-Fi extender? How do I reset my Rockspace Wi-Fi extender?

Image
  Is Rockspace a good WiFi extender? Network issues are common for everyone, wherever you go far from your router your network speed goes slow and you will face interruption in browsing social media or other sites. But as technology gets advanced right now, all router firms start to sell extenders. But We are not aware of which one is best for us. Let’s go through the features of Rockspace Wi-fi Extender and get decide either its good for use or not: Rockspace Extender has inbuilt dual-band extenders, It is able to work on both bands: 2.4 GHz or 5 GHz respectively. It serves 300 Mbps for 2.4Ghz and 1734 Mbps for 5 GHz with coverage capacity up to 1292 sq. ft. Some Unique features are: Easily Setup 4 PCB dual-band antenna fully flexible and adjustable Contain Wired gigabit port which supports 2100 Mbps speed Supports IPv6 and IPV4 protocols Smart Signal Switching capacity with optimal performance Installation of Rockspace Wi-Fi Extender There is no need to install network equipme
Read more