How do I reset my rockspace Wi-Fi extender??

 Rerockspace.local Wi-Fi Extender comes up with various models and speeds from the single band to dual bandwidth with high speed. The main task of a Rerockspace.local wi-fi extender is to extend your existing wi-fi network and increase the range area host where the network can’t reach. Your existing Wi-Fi should have the facility of dual-band to connect the Rerockspace.local Wi-Fi extender in the 5Ghz band that supplies your booster network with full speed and range.


Let’s have a look how to connect this rerockspace-local Wi-Fi extenders with rockspace router: There is two way to set up a new rerockspace-local Wi-Fi repeater device, using the WPS button -doesn’t require login credentials and the second one - login rock space web interface with re.rockspace-local.com or default login IP address.

  • In both methods, you should be physically available there beside the local Rockspace signal booster to connect with your existing host Wi-Fi network. 

  • Setup the rerockspace-local Wi-Fi Extender – Using WPS button

  •  Default Login URL– re.rockspace.local  

  •  Login IP Address – 192.168.0.254

  •  Default Username- NA

  •  Rockspace password– Create new password for first time login

All these things get ready now proceed for set-up:


Setup the rerockspace.local Wi-Fi Extender – Using WPS button is a fast and easy way to configure the rerockspace-local wi-fi extender. There is no need for any login username, password, login extender setting that’s just a plug and play method.

  1. Plug-in the ReRockspace-local Wi-Fi Extender to the wall power socket, near the wi-fi router

  2. Wait till the Led light turn on to the solid blue.

  3. There you will see small WPS button in the existing wi-fi router and press that button.

  4. Now press the WPS button of the Range extender device within 2-minute pressing of the WPS button of the router.

  • Rerockspace.local Wi-fi Extender Setup - using Web interface.

1. Connect the Rerockspace.local Wi-fi extender to the power wall socket in the same room where your wi-fi router is available

2. Now, open the wifi in your mobile or laptop and scan the wi-fi network, after a few minutes you

will get the default rock space SSID “rockspace_ext”.

3. Connect-> “rockspace_ext” SSID and wait to connect mobile/laptop WIFI to your

Rerockspace.local wi-fi Extender device.


4. Open the browser which you already in your system and access http://re.rockspace.local or http://192.168.0.254 and wait to access the login page.


5. You need to create a new login password for the Rerockspace.local wi-fi range extender during first time setup. Use a stronger login password for security purposes

press the next button.


6. In the next step, when you scan the wi-fi network will get a list of all Wi-Fi networks running

nearby rockspace extenders.


7. Choose one of your existing Wi-Fi network names from the list whose password you know well and the one Existing Wi-Fi network you want to extend.


8. Extended WIFI network- If you want to change the SSID of extended network change from here itself.


9. Wait for a couple of seconds and there is your extended successful page.


10. Open your mobile device and rescan the wi-fi network


11. You will analyse one more SSID there with the new name which you had created while

configuration. Use the same wi-fi password as the existing password for your new SSID.


So, that’s the two way to set Rockspace wi-fi extender for to boost your wi-fi and get speed up the net.


How to Reset Rock Space Range Extender

There are various forms of the problem may occur like Login IP address not working, forget login password or rage extender connecting disconnecting problem all can get fix with reset and setup again. That’s the most preferable process to get reset again, for that you can visit the link : rerockspace-local.com or follow these steps: 


  • Plug-in your Rerockspace.local wi-fi extender device into the power socket and wait till turn power leads to solid blue light.
  • Press the reset button with the help of a needle or paper clip for 8-10 seconds.
  • After a while the power LED will turn solid on and the device will be restored into default mode.
  • Follow the above steps to set up again and make sure either your issue gets solved or not. Or you can take references from Rockspace.local. In Rerockspace.local you will get all query solutions related to Rockspace router and their extender.




Comments

Post a Comment

Popular posts from this blog

How do I connect my Rockspace repeater? How do I reset my repeater?

Image
  First of all, before getting to know about How do I connect my Rockspace repeater? We need to get aware of Rockspace repeater and about their features: Rockspace repeater is well known as a Wi-fi booster or Wi-fi Extender used for extending the existing network with a full-speed network. If you want to know more about their features then visit: re.rockspace.local or http:// re.rockspace.local. Method for setup the Rockspace repeater: There are two best methods recommended by the expert for getting connected with Wi-fi Extender. Those two methods are briefly explained here in the step-by-step process: Method 1#: Getting Connect by WPS Method: If you are using an old wi-fi extender then you need to reset the extender. For that, you have to press the reset button for a couple of minutes and the extender will reset. If your extender is new then no need to reset. Place the extender near the rockspace router. Plugin your rockspace wi-fi extender in the power socket and make sure that ...
Read more

Why should I reset my re.rockspace.local range extender?

Image
  Like with any other hardware unit, your re.rockspace.local wireless extender too can face some problems or errors. There could be all sorts of potential reasons that you require to perform a reset on your range extender. Here, first of all, we will discuss all such potential reasons causing a kernel panic. Three of them are the basic reasons; 1. Bugs in firmware: - Just like a computer, your router and the wireless range extender can crash because of firmware bugs eating up most of the memory and causing compulsory reset to be performed. You can delete the bugs and clear the caches out of the memory of your range extender but some bugs can only be removed after reset.  2. IP addresses Conflicts: - Your Rockspace local wireless range extender manages both public and private IP addresses. Sometimes both the IP addresses mess up and create conflicts. If two or more devices on your network have the same IP address, or if your Rockspace range extender doesn't have an up-to-dat...
Read more